Error messages

Firmware Version Incompatible

1. Update the firmware in Updater.
2. Plug PROG into the PC.
3. Reload Studio and press Connect your Zen.

E3, E3001 or E3002

1. Unplug everything from the Zen.
2. Hold the small blue reset button.
3. Still holding, plug CONSOLE/PC into your PC.
4. Let go once the screen reads Zen Bootloader.
5. Install the firmware in Updater.
6. Keep the cable in and the page open until it finishes.
7. Update fails? Plug PROG into the PC as well for extra power, then try again.

Stack or Bytecode error

1. Do a hard-reset.
2. Program your scripts again in Studio.
3. Error returns right after one script? Leave that script off the Zen.

Freezing or odd behaviour

Do a hard-reset.

Still stuck? Ask in Support Chat.