fanatec-ps3
Fanatec PS3 mode
Do this before turning on Wheel Mode, or force feedback will not fully work. Keep your hands off the wheel while it calibrates.
CSR, CSR Elite, 911 GT2 and 911 Turbo S
Turbo S: this works with no RF dongle and the latest Fanatec firmware.
- Plug the Zen into the PS4 or PS5.
- Connect the Zen to the USB port on the left side of the wheel base.
- When the wheel has calibrated, hold Back for about 1 second. CSR, CSR Elite and GT2: the
- - -on the display disappears. Turbo S: the wheel buttons go dark. - Press Connect and Back together. CSR and CSR Elite: a dot appears on the display. GT2 and Turbo S: the buttons light up with PlayStation symbols.
- Unplug the wheel from the Zen and leave it powered on.
911 GT3 RS and RS v2
- Plug the Zen into the PS4 or PS5.
- Plug the wheel's USB cable into the Zen.
- When calibration finishes, press Base and Select together.
- Unplug the wheel from the Zen and leave it powered on.
ClubSport Wheel Base
- With the console off, plug the Zen into the console and the wheel base into the Zen.
- Power on the wheel base.
- Power on the console and wait for the main menu and for the wheel to finish calibrating.
- Straight after calibration, press Select and Circle together on the Universal Hub. A red dot on the tuning display confirms PS3 mode.
BMW M3 GT2, Formula Black, Formula Carbon or Porsche 918 RSR rim: straight after calibration, press one of these pairs together instead.
- Select (9) + Horn (22)
- Select (9) + Circle (3)
Menu buttons on PS4
- Home: L3 + R3
- Share: the black button at the bottom left of the rim