GameSir on Xbox

G7 SE

1. Update the controller to the latest firmware in the GameSir Nexus app.
2. Open Profiles, keep Profile 1 selected, then choose Configure and Sticks.
3. Left stick: set Initial to 0 and turn on RAW.
4. Right stick: do the same.
5. Rotate both sticks until X and Y show 0.00%, then press A.
6. Plug CONSOLE/PC into the Xbox.
7. Wait 5 seconds, then plug the controller into A1. Sooner and it will not turn on, so check for its white light.
8. Tap the reset button on the Zen and wait a few seconds for the lights to turn green.

T7 headset audio

1. Unplug the Zen from the Xbox.
2. Check the controller is off. If it stayed on, switch it off by hand, as it may still be paired to the Xbox.
3. Plug the headset into the controller.
4. Plug the controller into A1, leaving it switched off.
5. Plug the Zen's CONSOLE/PC port into the Xbox.
6. If the mic gives trouble, do steps 1 to 5 with the Xbox powered off, then turn the Xbox on last.