Wheel on PS5

Keep your hands off the wheel once it is connected: force feedback setup and calibration start automatically and it can move suddenly.

1. Have ready: a supported wheel and game (wheels) with the wheel's power and every pedal and shifter attached, a PS4 Speciality AUTH controller such as the HORI PS4 Mini-Pad, and Zen Studio on a Windows PC.
2. Fanatec wheel: put it in PS3 mode first with fanatec-ps3.
3. On the PS5, go to Settings > System > Power Saving > Set Time Until Controllers Turn Off and choose Don't Turn Off.
4. In Settings > System > Power Saving > Features Available in Rest Mode, set Supply Power to USB Ports to Always.
5. In Settings > Accessories > Controllers, set Communication Method to Use USB Cable.
6. Turn off every script and game pack on the Zen.
7. Plug the Zen into the PS5 with any controller in it.
8. Go to Settings > Accessories > Bluetooth Accessories and Delete every PlayStation controller so none re-pairs by itself.
9. Plug the Zen's PROG port into your Windows PC and open Zen Studio.
10. Go to Tools > Zen Operational Mode, pick Wheel Mode and click Finish. The Zen's screen shows the Wheel Mode logo.
11. Press the Zen's reset button once. If Zen Studio shows Device Disconnected, replug PROG.
12. In Device Panel, turn on PS4 Speciality. The Zen restarts.
13. Replug PROG and check PS4 Speciality is still on.
14. Unplug every cable from the Zen.
15. Plug the AUTH controller into A1 and leave it there whenever you use the wheel.
16. Plug the wheel into A3 with its power connected.
17. Plug the Zen's CONSOLE/PC port into the PS5.
18. With the AUTH controller and wheel both on, press the reset button to sync, then keep your hands off while it calibrates.
19. If it does not sync, unplug the AUTH controller from A1 and plug it back in.

The game sees your wheel as a Logitech G29, so no remapping is needed.